CONINVERS®
Crimp Tools for all Crimp Contacts in this Catalog
Picture	Details	Description	Part Number
		Setting up the Universal Crimp
		Tool requires two steps.  Set the
		positioner for the different contact
		length between 1 and 12.
		Set the eccentric disc from A-D for
		crimping strength.	RC-Z2378
		This tool is usable for all the RC,
		SC and SI contacts.
		The enclosed brochure explains
		for each contact and wire
		which adjustments you have to
		make.
		The Crimp Tools for the power
		connector contacts of the series
		SF and SM.
		For contacts with 1 mm, 2 mm,
		and 3.6 mm diameter.
		The appropriate settings must
		be made on the crimp tools with	SF-Z0007
		the various versions of crimping	SF-Z0008
		heads and positioners.	SF-Z0009
		The settings and tool part numbers
		you can find in our catalog on
		pages R-35-19 and R-35-22.
		This Universal crimp tool with
		8 impression crimp is usable
		for almost all RC, SC, SI and SF
		contacts. (If necessary we can
		provide you with positioners
		and turrets as well.)  With precision
		ratchet that controls cycling of the
		tool in both directions of handle			Crimp
		movement.			Tools
		AWG 12-24	AF 8