Circular Connectors  M 9
Panel mount connectors male front/rear solder/PCB (Mating Connectors see F-5...K-4..)
Figure	Dimensions	Description	Pos.	Part Number
		Panel mount connector	2 male	GABK9-KDK3-K002
		made of brass/nickel plat.	3 male	GABK9-KDK7-K003
		screw locking system	4 male	GABK9-KDA1-K004
		M 9 x 0.5 mm	5 male	GABK9-KDA5-K005
		front mount with hex nut	7 male	GABK9-KDB3-K007
		from the back	8 male	GABK9-KDB7-K008
		with solder cups
		Panel mount connector	2 male	GABK9-KDK3-H002
		made of brass/nickel plat.	3 male	GABK9-KDK7-H003
		screw locking system	4 male	GABK9-KDA1-H004
		M 9 x 0.5 mm	5 male	GABK9-KDA5-H005
		rear mount with hex nut	7 male	GABK9-KDB3-H007
		from the front	8 male	GABK9-KDB7-H008
		with solder cups
		Panel mount connector	2 male	GABK9-KDK3-I002
		made of brass/nickel plat.	3 male	GABK9-KDK7-I003
		screw locking system	4 male	GABK9-KDA1-I004
		M 9 x 0.5 mm	5 male	GABK9-KDA5-I005
		rear mount with hex nut	7 male	GABK9-KDB3-I007
		from the front	8 male	GABK9-KDB7-I008
		dip solder PCB
Useful accessories for these connectors you will find on page F-07-01
			Contact arrangements with view
			to the mating side of the female
			insert. Female outside, Male inside.
			For more information please ask
			for a spec. sheet.
Number of contacts:	2, 3, 4, 5, 7, 8	Min. Temperature:	-40° C  (-40° F)
Locking system:	screw M 9 x 0.5 mm	Rated Voltage:	125 Volt
Wire gauge:	2-5 pos. = 0.25 mm² (24AWG)	Test Voltage:	1,750 Volt
Wire gauge:	7-8 pos. = 0.14 mm² (26AWG)	Rated Current:	Pos. 2-3 (4A) 4-5 (3A) 7-8 (1A)
Protection:	IP 67	Contact resistance:	≤ 3 mΩ
Mating cycles:	>500
Max. Temperature:	85° C (185° F)	For more information please ask for a spec. sheet