Circular Connectors  M 16  (IP 67)  shielded version
Cable connectors - male - right angled  (Receptacles on page F-31....F32)
Figure	Dimensions	Description	Pos.	P/N silver plated	P/N gold plated
		Cable connector male	2	DBCI9-EAK1-G502
		Cable entry: 4-6 mm	3 DIN	DBCI9-EAK5-G503
		0.16 - 0.24 in.	4	DBCI9-EAK9-G504
		M 16 screw locking system.	5	DBCI9-EAA3-G505
		With solder cups contacts	5 DIN	DBCI9-EAA7-G505
		2-8 pos.     up to 18 AWG	6 DIN	DBCI9-EAB1-G506
		12-19 pos. up to 24 AWG	7	DBCI9-EAB5-G507
		24 pos.      up to 26 AWG	7 DIN	DBCI9-EAH1-G507
		Mating cycles:  > 500	8 DIN	DBCI9-EAG1-G508
		Insert/shell: PBT/zinc die cast	12		DBCI9-EAB9-G512G
		Contacts: CuZn, silver plat.	14		DBCI9-EDE1-G514G
		Contacts: CuZn, gold plated	16
		Temp: -30°C (-22°F)	19		DBCI9-EDF1-G519G
		+95°C (203°F)	24		DBCI9-EDI5-G524G
		Rated current:
		2-3 pos.      7 A
		4-5 pos.      6 A
		6-8 pos.      5 A
		12-19 pos.  3 A		Shield connected with shielding rings
		24 pos.        1 A
		Rated voltage:
		2-6 pos.         250 V
		5 DIN              60 V
		7 pos.            125 V
		7DIN-24 pos.  60 V
		Cable connector male	2	DBCI9-EFK1-G502
		Cable entry: 6-8 mm	3 DIN	DBCI9-EFK5-G503
		0.24 - 0.32 in.	4	DBCI9-EFK9-G504
		M 16 screw locking system.	5	DBCI9-EFA3-G505
		With solder cups contacts	5 DIN	DBCI9-EFA7-G505
		2-8 pos.     up to 18 AWG	6 DIN	DBCI9-EFB1-G506
		12-19 pos. up to 24 AWG	7	DBCI9-EFB5-G507
		24 pos.      up to 26 AWG	7 DIN	DBCI9-EFH1-G507
		Mating cycles:  > 500	8 DIN	DBCI9-EFG1-G508
		Insert/shell: PBT/zinc die cast	12		DBCI9-EFB9-G512G
		Contacts: CuZn, silver plat.	14		DBCI9-EFE1-G514G
		Contacts: CuZn, gold plated	16
		Temp: -30°C (-22°F)	19		DBCI9-EFF1-G519G
		+95°C (203°F)	24		DBCI9-EFI5-G524G
		Rated current:
		2-3 pos.      7 A
		4-5 pos.      6 A
		6-8 pos.      5 A
		12-19 pos.  3 A		Shield connected with shielding rings
		24 pos.        1 A
		Rated voltage:
		2-6 pos.         250 V
		5 DIN              60 V
		7 pos.            125 V
		7DIN-24 pos.  60 V
For contact arrangements, measurements and useful accessories please see page
F-28..... and F-29...... For more technical information please ask for the spec. sheet.