Strain Reliefs and Accessories
Standard - High Performance - Adaptors - Plugs - Nuts - Accessories - Info
                              High Performance Strain Reliefs                  
 
  Applications     Features        
    Strong Strain Relief for straight-through cable entries. Material: brass, nickel plated  
    These Strain Reliefs seal cable entries and prevent Temp: -40C to +120C (-40F to 248F)
    contaminants from entering into enclosures.Completely Protection: IP68 watertight  
    insulated. With hexagon lower part and variable insert. Resistant to oil, water, ageing.
    Two part Insert for smaller and bigger cable diameter.          
Dimensions mm (inch) - Part Numbers  
Thread Thread Width Thread Approx. Cable entry Part    NPT sizes
NPT O.D. across flats length total length Cable dia. Number  
1/2 "   22 mm 12(0.47) 27(1.06) 05-12(0.20-0.47) GH-310.9012.0  
1/2 "   24 mm 12(0.47) 27(1.06) 07-15(0.28-0.59) GH-310.9012.1  
3/4 "   32 mm 14(0.55) 27(1.06) 07-15(0.28-0.59) GH-310-9034.0  
3/4 "   32 mm 14(0.55) 27(1.06) 09-20(0.35-0.79) GH-310.9034.1  
1 "   40 mm 20(0.79) 32(1.26) 18-28(0.71-1.10) GH-310-9100.0  
               
               
               
               
               
 
  Applications     Features        
    Strong Strain Relief for straight-through cable entries. Material: stainless steel    
    These Strain Reliefs seal cable entries and prevent Temp: -40C to +120C (-40F to 248F)
    contaminants from entering into enclosures.Completely Protection: IP68 watertight  
    insulated. With hexagon lower part and variable insert. Resistant to oil, water, ageing.
    Two part Insert for smaller and bigger cable diameter. Hex Nuts: Series GH-780...  
Dimensions mm (inch) - Part Numbers            
Thread Thread Width Thread Approx. Cable entry Part     PG-Sizes
PG-size O.D. across flats length total length Cable dia. Number  
PG 7 12.5(0.49) 14 mm 6.0(0.24) 23(0.91) 04-07(0.16-0.28) GH-388.0700.0  Stainless
PG 9 15.2(0.60) 19 mm 6.0(0.24) 24(0.94) 04-09(0.16-0.35) GH-388.0900.0  
PG 11 18.6(0.73) 22 mm 6.0(0.24) 26(1.02) 05-12(0.20-0.47) GH-388.1100.0     Steel  
PG 13.5 20.4(0.80) 24 mm 6.0(0.24) 27(1.06) 08-15(0.32-0.59) GH-388.1300.0  
PG 16 22.5(0.88) 24 mm 6.0(0.24) 27(1.06) 08-15(0.32-0.59) GH-388.1600.0    Version
PG 21 28.3(1.11) 32 mm 7.5(0.30) 32(1.26) 10-20(0.39-0.79) GH-388.2100.0